Concrete Hardened Floor_ Z-lion Diamond Tools Group

Welcome To ZL DIAMOND TECHNOLOGY CO.,LTD.

What concrete hardens floor


Concrete wear-resisting hardening floor is a special wear-resisting aggregate is divided into two scattered on the concrete, in the professional equipment for pulping and grinding, through the process of making the floor can be the strength of concrete 2-3 times more than. Thus, the wear resistance and impact resistance of concrete are improved, and the flatness of concrete is also improved.

Concrete wear-resisting hardening floor can be divided into quartz wear-resisting floor, emery wear-resisting floor and metal wear-resisting aggregate floor because of different wear-resisting aggregate. Its performance indicators also change according to the different aggregate.

Performance:

1, high wear resistance and impact resistance;

2, with a certain dustproof performance;

3, with high flatness;

4, with natural fire protection and environmental performance;

5, can improve the service life of concrete to reduce the damage rate of concrete;

application

For large workshops, garages, shopping malls, squares, roads have a good application.

The construction technology

Surface treatment: remove the floating slurry layer on the concrete surface evenly with a mechanical trowel equipped with a disk.

◇ First spreading material: the specified amount of 2/3 hardened wear-resistant floor material is evenly spread on the surface of the concrete in the initial setting stage, and polished with a low-speed wiping machine.

Scraper leveling: with 6 meters scraper evenly the hardened wear-resistant material along the transverse and longitudinal direction scraping and rough leveling;

◇ Second spreading material: evenly spread the specified amount of 1/3 color hardened wear-resistant material (on the surface of the wear-resistant material that has been polished for the first time), and polish it again with the erasing machine.

Surface polishing: According to the hardening of concrete, adjust the Angle of the polishing machine blade, polishing the surface layer to ensure the surface flatness and smoothness.

Base surface maintenance and expansion: Wear-resistant hardened floor should be maintained on the surface within 4-6 hours after the completion of construction, in order to prevent the rapid evaporation of surface water, to ensure the stable growth of wear-resistant material strength.




Chat now